Rear camera system kit & components

Specification
Popular accessories

Mount a camera on the back of the truck to give a perfectly clear rear view. The compact design makes this camera the perfect choice for a wide range of applications. The robust and weatherproof housing enables the use in even the most difficult conditions. This is a complete kit for a rear camera system that includes a camera with picture angle of 112°, a monitor with holder and a 6m connection cable.

Technical specification

The Camera:
*112° horizontal view angle
*Voltage supply: 9 V to16 V DC
*Operating temperature: -35°C to +65°C
*Protection class: IP69K
*State-of-the-art image electronics (CMOS image sensor)
*High shock and vibration resistance
*High sensitivity to light
*Sharp and high-contrast images
*Housing: stainless steel
*Weight: Ca. 0,25 kg
*Storing temperature: -40°C to +85°C
*Connection cable: 0.7 m molded, watertight M12/5 pol connector
---
The Monitor:
*Monitor size: 7”
*Housing protection class: IP 30
*Operating temperature: -30 °C...+80 °C
*Voltage supply: 12 V…48 V DC (9 V…60 V DC)
*Fuse: 5 A / 250 V AC IEC 60127-2 Standard glass type 5 mm x 20 mm (in connection cable)
*Number of videoinputs: 3
*Backlight: typ. 500 cd/m²
*Screen dimensions: Diagonal 17,8 cm, 16:9 Ratio
*Resolution in pixels: H800 x 3(RGB) x V480 Pixel
*Storage temperature: -30 °C...+80 °C
*Shock resistance / Vibration resistance:
- Vibration EN60068-2-6: 5 g (60 Hz...500 Hz) / 0.35 mm (10 Hz...60 Hz) / 2 h per axle
- Broadband random EN60068-2-64: 7.9 m/s2 RMS Class B / 5 Hz... 150 Hz / 5 h per axle
- Schock EN60068-2-27: 50 g / 11 ms / 6 shocks per axle, 3 x positive, 3 x negative
- Continuous shock EN60068-2-27: 30 g / 1000 per axle / 11 ms / 1 h per axle
*Control line (Input): 0 V... 60 V DC, RIN > 8 kΩ, switching threshold ca. 6 V (high-active)
*Contrast ratio: 800 (0°)
*Viewing angle: H 120° / V 100° (CR ≥ 10)
*Video signal: FBAS (CVBS)
*Video system: PAL / NTSC
*Signal input: 1 Vpp (30 % Sync neg) / 75 Ω
---
The Cable:
*Length: 6m