The MaxiGrip® stud is a patented Swedish self-assembly screw stud designed for off-road and commercial vehicles.
Made of hard metal, height: 15, 18 och 25mm. 200 pieces are included in a package.
- The number of studs is adapted to need and tire size.
- Basic recommendation is approx. 100 studs / tractor tire.
Fitted and removed easily with the accompanying special socket. The socket is provided with a default setting to provide a stud protrusion of 3 mm. The protrusion may vary depending on the resistance of the rubber so readjustment may be necessary. However, it is easy to learn the fitting technique. To remove the stud adjust the depth stop on the special socket backwards. Even well-worn studs can be removed.
Ensure that the stud you are using has a margin of 1mm between length and the tyre contact patch height, that is, for an 18 mm stud a minimum rubber contact patch height of 17mm. Cord thickness varies between 4-20mm depending on the type of tyre.
Count the number of contact patches on the tyre and decide on a mounting strategy for best results. If you are in any doubt – choose a shorter model.
- NOTE! The stud should be surrounded by rubber. Do not mount in any gap or pre-fabricated stud holes.