Mount a camera on the back of the truck to give a perfectly clear rear view. The compact design makes this camera the perfect choice for a wide range of applications. The robust and weatherproof housing enables the use in even the most difficult conditions. 1/4"-CMOS-camera with a picture angle of 115°. This is a complete kit for rear camera system that includes a camera, a monitor with holder and a 6m connection cable.

Handling loads positioned on a high level means compromising visibility. The same goes for loads that are wide and high and obstructing the driver’s view. A small camera placed on one of the forks or on the fork carriage, with a monitor in the driver’s compartment makes perfect sense. There’s also the possibility to mount a camera on the back of the truck to give a perfectly clear rear view too. Through the monitor – which features excellent picture and a colour screen – the driver is in full control of her/his operations, steering and actions.

Technical specification

The Camera:
• State-of-the-art image electronics (CMOS image sensor)
• High shock and vibration resistance
• High sensitivity to light
• Sharp and high-contrast images
• Visualisation: 115° horizontal view angle, corresponds to 144° diagonal view angle
• Power supply: 9 V to16 V DC
• Protection class: IP69K
• Housing: stainless steel
• Weight: Ca. 0,25 kg
• Operating temperature: -35°C to +65°C
• Storing temperature: -40°C to +85°C
• Connection cable: 0.7 m molded, water-tight M12/5 pol or Mini DIN/4 pol plug
---
The monitor:
• Housing protection class: IP 30
• Backlight: typ. 500 cd/m²
• Diagonal screen size: 17,8 cm (7“ / 16:9)
• Resolution in pixels: H800 x 3(RGB) x V480 Pixel
• Number of video inputs: 3
• Operating temperature: -30 °C...+80 °C
• Storage temperature: -30 °C...+80 °C
• Shock resistance / Vibration resistance:
- Vibration EN60068-2-6: 5 g (60 Hz...500 Hz) / 0.35 mm (10 Hz...60 Hz) / 2 h per axle
- Broadband random EN60068-2-64: 7.9 m/s2 RMS Class B / 5 Hz... 150 Hz / 5 h per axle
- Schock EN60068-2-27: 50 g / 11 ms / 6 shocks per axle, 3 x positive, 3 x negative
- Continuous shock EN60068-2-27: 30 g / 1000 per axle / 11 ms / 1 h per axle
• Control line (Input): 0 V... 60 V DC, RIN > 8 kΩ, switching threshold ca. 6 V (high-aktiv)
• Contrast ratio: 800 (0°)
• Viewing angle: H 120° / V 100° (CR ≥ 10)
• Video signal: FBAS (CVBS)
• Video system: PAL / NTSC
• Signal input: 1 Vpp (30 % Sync neg) / 75 Ω
• Voltage supply: 12 V…48 V DC (9 V…60 V DC)
• Fuse: 5 A / 250 V AC IEC 60127-2 Standard glass type 5 mm x 20 mm (in connection cable)
---
The cable:
• Length: 6m